Language: English | Español


 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SHEET AND WIRE ROLLING MACHINES

 


 

3" Mini Bench Rolling Mill

 
 
3inch mini bench rolling mill This is a lightweight portable mill, which can also be fitted with bangle design roll. It has been redesigned to facilitate working by removing the front support bars in front of rolls and taking the same underneath in the base. 



Go Top

 

4" Bench Combined Rolling Mill

 
 
4 inch bench combined rolling mill
This bench model rolling mill is provided with lever system so that either sheet rolls or the wire rolls can be used at any one time with provision to fit side rolls. This machine is also available with a specially designed steel fabricated stand with 1.0 HP 220 volts single phase Cast Iron body TEFC AC electric motor, R/F switch and V belt. The R/F switch is provided complete with wiring to allow both reverse and forward operation. 
Kindly ask for details.


Go Top

 

5" Bench Single Roll Rolling Mill

 
 
5 inch bench single roll rolling mill This is a bench rolling mill with roll size of 5" x 2.1/2" and is available in three models. It is available with either the sheet rolls, or wire rolls or can be supplied with combined sheet and wire grooves in one single roll. Similar rolling mill is also available with roll size of 4" x 2.1/4" and 6" x 3" in the three different versions as for the 5" size rolling mill. Specially designed 6" x 3" roll size bench rolling mill is also available with higher roll opening for thicker sheet work. Kindly ask for details.

 

Go Top

 

6" Bench Double Geared Rolling Mill

 
 
6 inch bench double geared rolling mill
This is a 6" x 3" roll size bench rolling mill with heavy duty roll housing and bigger gears. It is provided with EXTRA gears to provide HIGHER ROLL OPENING i.e. it allows thicker plates to be rolled due to higher roll opening as a result of extra gears. Also this model is provided with TWO big size roll driving gears instead of only ONE as in other Bench model rolling mills.
.ask for details.

Go Top

 

 

5" Motorised Single Roll Rolling Mill

 
 
5 inch motorised single roll rolling mill

This is a 5" roll length combined sheet and wire rolling mill with provision to mount side grooving rolls. The rollers are housed in strong solid steel housing. The machine is fitted with oil gear box system and supplied with heavy duty 1.0 HP 220 volts single phase AC electric motor and R/F switch for both forward and reverse operation. 
Kindly ask for details.


Go Top

 

5" Floor Model Combined Rolling Mill

 
   
5 inch floor model combined rolling mil This is a 5 inch roll length combined sheet & wire rolling mill. The rolls are made of high chromium special steel, hardened and ground finished. They are housed in extremely strong frame to overcome all the vibrations and stresses developed during working. The rolls are running in special anti friction phosphor bronze alloy. The gears are made of case hardened steel and immersed in oil for noiseless and smooth operation. Various components are standardised and are interchangeable. This assures easy maintenance.
 

GD-125

 
Features / Accessories supplied with the machine:
a. Roll size of 5" x 2.1/2" made from HCHC Special Steel.
b. 1.5 HP 220 Volts Single phase 50 Hz AC electric motor, Switch & V belt.
c. Side grooving rolls for half round and V design.
 
Safety guards in front of both the sheet and wire rollers is available as an extra optional accessory.
 
Similar machine with roll length of 100 mm in with 1.0 HP motor having the above features is also available. Kindly ask for details.


Go Top

 

6" and 8" Floor Model Combined Rolling Mill

 
 

combined rolling mill GD 160

combined rolling mill GD 200

 
GD-160
 
GD-200

The GD-160 is a 6 inch roll length Combined Sheet & Wire rolling mill similar to model GD 125. It is designed for continuous working with automatic lubrication as standard. Solid heavy construction is guaranteed to give years of trouble free service.

Features / Accessories supplied with the machine:
a. Roll size of 6" x 3" made from HCHC Special Steel.
b. 3.0 HP 440 or 380 Volts, 3 phase, 50 or 60 Hz. AC electric motor, complete with Control panel box.
c. Automatic Lubrication system with flow control arrangement.

Following optional features are available at additional cost. 
1. TWO SPEED 3.0 HP / 5.0 HP 960 rpm / 1440 rpm AC electric motor with necessary Control Panel for the same including two forward and two reverse speed control switch.
2. Foot operated Emergency Stop System. 
 
Similar 8" x 4" roll size machine is also available in model GD-200 with TWO SPEED 5.0 / 7.5 HP motor, Emergency Stop, automatic lubrication system and side grooving rolls is also available. 
Kindly ask for details


Go Top

 

8" Floor Model and Triple Geared Rolling Mill

 
 

8 inch single roll motorised rolling mill

triple gear heavy duty sheet rolling mill

 
8" Floor Model Rolling Mill
 
8" Triple Geared Rolling Mill

 

The 8 Floor model Rolling Mill is a heavy duty single head gear box fitted 8 roll length sheet rolling mill complete with suitable HP 440 volts / 380 volts 3 phase AC electric motor, automatic Lubricating pump and emergency stop generally as shown above. It is also available with wire rollers instead of sheet rollers. We can also supply similar design mill with 6 roll length.

 The 8 Triple geared rolling mill is an extra heavy duty sheet rolling mill. This is a very dependable sturdy and long lasting rolling mill. The rolls are made from HCHCr steel with 62 RC hardness and fine mirror finish for excellent quality. Its excellent roll quality makes the mill suitable to make strips for coining and other purposes as well. The rolling mill is equipped with heavy fly wheel on one side and motorization wheel on the other side. Due to heavy fly wheel giving momentum to the rolls, this rolling mill is also widely used for rolling of low purity hard silver and similar hard metal.This rolling mill is powered by a 5.0 HP 440 volts / 380 volts 3 phase AC electric motor fitted with suitable ON/OFF push button starter and a Reverse / Forward switch

Go Top

 

10" and 12" Floor model Rolling Mill

 
 

MASTER rolling mill GD 250S

 

MASTER rolling mill GD 300S

GD - 250 S
 
GD - 300 S



MASTER
Extra heavy duty single head gear box fitted sheet rolling mill complete with suitable HP 960 rpm AC electric motor, automatic Lubricating pump and emergency stop generally as shown above. Approximate dimensions /specifications are as under:

MODEL
GD 250S
GD 300S
Rolling Mill Details
10" x 5"
12" x 6"
Rolls
10" x 5"
12" x 6"
Rolls Length
10 inch
12 inch
Rolls Diameter
5 inch
6 inch
RPM of Rolls
20 RPM
18 RPM
Electric motor
7.5 HP
440 V/ 3 phase/ 50 Hz
10 HP
440 V/ 3 phase/ 50 Hz
Rolling Mill Dimensions
                            Inch
                            CMs
L    x    B   x    H
42"    x    35"    x 65"
107cm x 58cmx 165 cm
L    x    B    x    H
56"    x    29"    x    69"
140cm x74cmx 175 cm
Net weight
850 Kgs
1250 Kgs
Wooden case Dimensions
50" x 29" x 74"
127cm x 74cm x 188 cm
65" x 36" x 78"
165cm x 92 cm x 198 cm
Gross weight
1125 Kgs
1650 Kgs
 
 

Go Top

Home | About Us | Jewelry Machines | Industrial Machines | Feedback Form | Contact Us